8 Retrograde IM Femoral Nailing:
Supine with Unilateral Skin Traction Standard Component Installation
and Adjustment Standard Component Installation and Adjustment Prior to procedure set up, refer to the Standard Component Installation and Adjustment section and complete the required steps. VIEW NOW CONTINUE WITH SETUP 1 Jack Mount Assembly Ensure that the Jack Mount Assembly is installed. Jack Mount Assembly Ensure that the Jack Mount Assembly is installed. View Part 2 Femur Lift Assembly Attach the appropriate Femur Lift Assembly (right or left) to the operative side of the table. Femur Lift Assembly Attach the appropriate Femur Lift Assembly (right or left) to the operative side of the table . View Part 3 Radiolucent Leg Spars Attach the appropriate left or right Hana Radiolucent Leg Spar on the operative side of the table and lock in place. Radiolucent Leg Spars Attach the appropriate left or right Hana Radiolucent Leg Spar on the operative side of the table and lock in place. View Part 4 Femur Lift Foot Pedal Plug the Femur Lift Foot Pedal into the front of the base of the table. Ensure that the Femur Lift Assembly is in its lowest position. Femur Lift Foot Pedal Plug the Femur Lift Foot Pedal into the front of the base of the table. Ensure that the Femur Lift Assembly is in its lowest position. View Part 5 Pelvic Pad Place the Pelvic Pad on the table. 6 Accessory Clamp Attach an Accessory Clamp to the operative-side Leg Spar near the Foot-End with the receiver on the non-operative side of the table. 7 Tibia Traction Upright Insert the optional Tibia Traction Upright into the Accessory Clamp from the bottom with the Traction Unit Receiver facing the operative side of the table. 8 Traction Unit Attach the optional Traction Unit to the Tibia Traction Upright. 9 Traction Foot Plate Assembly Attach the optional Traction Foot Plate Assembly to the Traction Unit. 10 Optional - Patient Transfer Board Attach the optional Patient Transfer Board. Slide the Patient Safety Strap into place. Adjust the table to the appropriate height for patient transfer from the stretcher. Patient Instructions Patient Instructions Transfer the patient to the table in the supine position and secure with the Patient Safety Strap. 11 Perineal Post Insert the padded Perineal Post into the table. Move the patient to establish firm contact with the Perineal Post and adjust the Patient Safety Strap as appropriate. 12/13 Optional - Lateral Perineal Post and Adapter Attach the optional Lateral Perineal Post and Adapter to the Femur Lift Assembly. Position the patient’s leg over the Lateral Perineal Post. Patient Instructions Patient Instructions It is important that the Lateral Perineal Post be placed against the distal femur, two or three inches proximal to the popliteal fossa. Placement of the post into the fossa may result in potential neurological or circulatory injury. Patient Instructions Patient Instructions Secure the patient’s operative foot to the Traction Foot Plate Assembly. Before making any height adjustments to the Lateral Perineal Post using the Femur Lift Assembly, be sure to remove the operative foot from the Traction Foot Plate Assembly. Once height adjustments have been made, re-secure the foot to the Traction Foot Plate Assembly. 14 Well Leg Support Adapter and Articulating Bracket Attach the Well Leg Support Adapter to the Leg Spar Mount on the non-operative side of the table and lock into position. Attach the Articulating Bracket to the Well Leg Support Adapter and tighten securely. 15 Well Leg Support Assembly Attach the Well Leg Support Assembly to the Well Leg Support Adapter using the Articulating Bracket and secure the patient’s non-operative leg. 16 Arm Board Install a Hana Arm Board with pad to both left and right sides of the table and position the patient’s arms out to the side, or attach one Arm Board with pad and the optional Cross Arm Support using a Clark Socket to the non-operative side of the table. Secure the patient’s arms. 17 Optional - Patient Transfer Board Remove the optional Hana® Patient Transfer Board by sliding it out from underneath the fully positioned patient. Setup Complete The Retrograde IM Femoral Nailing: Supine with Unilateral Skin Traction setup is now complete. For more information or questions about this setup or any setup, please refer to the Owner's Manual or contact Mizuho OSI for additional support.